Cover image for "ISO 14064 Explained: Parts 1, 2 and 3 and How Verification Works"

ISO 14064 Explained: Parts 1, 2 and 3 and How Verification Works

ISO 14064 is the international standard family for quantifying, reporting and verifying greenhouse gas emissions. Here is what each part does, how it compares with the GHG Protocol and what changes are coming.

ISO 14064 is a three-part international standard for greenhouse gas accounting. Part 1 (2018) covers organisational inventories, Part 2 (2019) covers emission reduction and removal projects, and Part 3 (2019) sets out how GHG statements are verified or validated. It is often used alongside the GHG Protocol, particularly when a footprint needs independent verification.

Customers, lenders and public bodies increasingly ask whether a carbon footprint has been “verified to ISO 14064”. This guide explains what that phrase actually means, what each part requires, and what to expect from a verification.

What is ISO 14064?

ISO 14064 is part of the ISO 14060 family of greenhouse gas standards, developed by ISO technical committee TC 207/SC 7. It is “GHG programme neutral”. In other words, it sets general principles and requirements, and where a specific scheme or regulation applies, that programme’s own requirements are added on top.

The three parts are:

Part Current edition Covers
ISO 14064-1 2018 (published December 2018) Quantifying and reporting GHG emissions and removals at organisation level
ISO 14064-2 2019 (published April 2019) Quantifying, monitoring and reporting reductions or removal enhancements from projects
ISO 14064-3 2019 (published April 2019) Verifying and validating GHG statements for organisations, projects and products

A closely related standard, ISO 14065:2020, sets requirements for the bodies that carry out validation and verification. It was confirmed as current in March 2026.

What does ISO 14064-1 require?

Comparison table mapping the six ISO 14064-1 emission categories to their closest GHG Protocol scope equivalents

ISO 14064-1:2018 sets out how to design, develop, manage and report an organisational GHG inventory. The main elements are:

  • Organisational boundaries. Decide which facilities are included, using a control or equity share approach.
  • Reporting boundaries. Identify direct and indirect emissions and removals.
  • Six emission categories. Report direct emissions and removals, then indirect emissions from imported energy, transportation, products the organisation uses, use of the organisation’s products, and other sources.
  • Significance of indirect emissions. Quantify significant indirect emissions and justify excluding any source.
  • Inventory management. Document methods and data, manage quality and set a base year.
  • A GHG report. Prepare a report suitable for intended users, including for verification.

The six categories do not line up perfectly with the GHG Protocol’s three scopes. The diagram shows the closest equivalents. Direct emissions match Scope 1 and imported energy matches Scope 2. The remaining four categories together cover broadly the same ground as Scope 3, grouped differently. If you report to customers who use GHG Protocol language, you can present the same inventory both ways.

How is ISO 14064-1 different from the GHG Protocol?

They are compatible, and most inventories prepared well under one can be presented under the other. The main differences are structure and emphasis. The GHG Protocol is a detailed accounting rulebook with extensive sector guidance. ISO 14064-1 is shorter and more procedural, and it is designed to be verified against.

The distinction will narrow. On 29 July 2026 the GHG Protocol announced that its corporate standards and ISO 14064-1 will be consolidated into one joint corporate standard, with public consultation planned for the second quarter of 2027 and publication for the fourth quarter of 2028. ISO’s own page now lists ISO 14064-1:2018 as “to be revised”, with a working draft under development. Our article on the https://auditmycarbon.com/ghg-protocol/ explains the revision in more detail.

What is ISO 14064-2 used for?

Part 2 applies to projects, not organisations. It covers planning a GHG project, identifying the sources, sinks and reservoirs relevant to the project and its baseline scenario, monitoring, and reporting the resulting reductions or removal enhancements.

Carbon credit programmes typically have their own methodologies, which add to these general principles. For most SMEs, Part 2 matters only if you are developing a project, such as a woodland or on-site removal scheme, that will generate credits or reported reductions.

How does ISO 14064-3 verification work?

ISO 14064-3:2019 sets principles and requirements for verifying and validating GHG statements. Verification looks back at historical data, such as last year’s footprint. Validation looks forward at projected results, such as a project’s expected removals.

A typical organisational verification follows these steps:

  1. Agreement on scope. The verifier and the organisation agree the level of assurance (commonly limited or reasonable), the materiality threshold, the criteria (such as ISO 14064-1 or the GHG Protocol) and the period covered.
  2. Strategic analysis and risk assessment. The verifier looks at where errors are most likely: complex sources, manual data and estimates.
  3. Evidence gathering. Sampling of invoices, meter readings, fuel cards, travel records and calculations, with site visits where needed.
  4. Findings. Errors and omissions are raised for correction.
  5. Verification statement. The verifier issues an opinion on whether the GHG statement is free of material misstatement.

Worked example: materiality

Suppose a hypothetical organisation reports 850 tCO2e and the agreed materiality threshold is 5%.

  • Materiality limit: 850 × 0.05 = 42.5 tCO2e.
  • The verifier finds misstatements totalling 30 tCO2e: 30 ÷ 850 = 3.5%, below the threshold. The statement can be verified, though the errors should still be corrected.
  • If the misstatements totalled 62 tCO2e, that would be 7.3%, above the threshold. The organisation would need to correct the inventory before a clean opinion could be given.

Materiality thresholds and assurance levels are agreed for each engagement or set by the relevant programme. They are not fixed by ISO 14064-3 for every case.

Who can verify a footprint against ISO 14064?

ISO 14065:2020 sets requirements for validation and verification bodies, building on ISO/IEC 17029:2019 for competence, consistent operation and impartiality. In the UK, verification bodies can seek accreditation against ISO 14065.

When choosing a verifier, check:

  • whether they are accredited for GHG verification, and for which sectors;
  • that they did not prepare the inventory they are verifying, since impartiality is central to the standard;
  • what level of assurance they will provide, and what that will cost in time and evidence.

There is an important difference between a carbon audit and a verification. A carbon audit, as we use the term, measures your footprint and finds reduction opportunities. Verification is an independent check of a footprint someone else prepared. Our guide to the difference between a carbon audit and a carbon footprint explains where each fits.

Do UK businesses need ISO 14064?

No UK law requires ISO 14064 verification for SMEs. It becomes relevant when:

  • a large customer asks for a verified footprint as part of supplier requirements;
  • you want third-party assurance before publishing targets or claims, which reduces green claims risk;
  • you are developing a carbon project or applying to a scheme that references ISO 14064-2 or -3;
  • you report under frameworks that ask for assurance of greenhouse gas data.

The practical route is to build an inventory that would pass verification, even if you do not commission one straight away. Start with a first estimate using our business carbon footprint calculator, then strengthen the evidence trail. Our guide to how long a carbon audit takes for a small company sets realistic timelines. If you want an inventory prepared to ISO 14064-1 standard and ready for independent verification, you can book a carbon audit with us.

FAQ

What is the difference between ISO 14064-1, 14064-2 and 14064-3?

Part 1 covers organisation-level GHG inventories, Part 2 covers project-level reductions and removals, and Part 3 covers verification and validation of GHG statements. Parts 2 and 3 were both published in April 2019; Part 1 in December 2018.

Is ISO 14064 a certification?

Not in the same way as ISO 14001. Organisations do not hold an ongoing ISO 14064 certificate. Instead, a specific GHG statement for a specific period is verified against the standard, and the verifier issues a statement.

Is ISO 14064 the same as the GHG Protocol?

No, but they are compatible and widely used together. They are being consolidated into a joint corporate standard, with publication planned for Q4 2028.

Is the current ISO 14064-1 still valid?

Yes. ISO confirmed ISO 14064-1:2018 in its 2024 review, so it remains current, although it is marked “to be revised” and a replacement is under development.

What is the difference between verification and validation?

Verification assesses historical data, such as a past year’s emissions. Validation assesses the reasonableness of assumptions and projections, typically for a project’s expected reductions or removals.

Sources

#assurance #carbon accounting #ghg protocol #iso 14064 #verification
B K Hooda
B K Hooda
Carbon Audit Specialist · Audit My Carbon
🌿
Eco-Auditor Bot
Online