Cover image for "Homeworking Emissions Scope 3: How to Calculate Them with the 2026 UK Factors"

Homeworking Emissions Scope 3: How to Calculate Them with the 2026 UK Factors

Hybrid working moves some emissions from your office to your employees’ homes. Here is where those emissions sit in Scope 3, what the UK government factor assumes, and how to calculate them in a few lines.

Homeworking emissions are the extra energy your employees use for heating, lighting and equipment when they work from home instead of an office. Under the GHG Protocol, they are optional and sit in Scope 3 Category 7, employee commuting. In the UK, most organisations calculate them using DESNZ’s homeworking factor per full-time-equivalent (FTE) working hour.

Hybrid working changed how many offices operate. It also moved part of the energy used to do the work out of your building and into your employees’ homes. If you report office energy in Scope 1 and 2 but ignore homeworking, your footprint can appear to fall when emissions have only moved. This post explains where homeworking fits and what the UK factor assumes. It then walks through a calculation you can repeat each year.

Where do homeworking emissions sit in Scope 3?

The GHG Protocol’s technical guidance for Category 7 (employee commuting) says companies “may include emissions from teleworking” in this category. Two points follow from the guidance:

  • It is optional. Including homeworking is a choice, but once you include it you should do so every year so results stay comparable.
  • Only the additional energy counts. The guidance asks you to set a baseline and count only the extra emissions from working at home. A fridge that runs anyway does not count. Extra heating or cooling during the working day does.

Homeworking emissions are your employees’ household energy use, so they never belong in your Scope 1 or 2. They sit alongside commuting, which usually falls when homeworking rises. For a reminder of how all 15 categories fit together, see https://auditmycarbon.com/scope-3-emissions-categories/.

If you bid for central government contracts, note that the minimum boundary for Category 7 in the PPN 006 technical standard describes commuting journeys and does not mention homeworking. Including it is your decision, and you should state it either way. Our guide to Carbon Reduction Plans for government contracts covers the rest of that standard.

What does the DESNZ homeworking factor assume?

The calculation follows five steps, and the DESNZ factor is the key input.

Five steps to calculate homeworking emissions, from hybrid policy data to FTE hours, DESNZ factor and Category 7 reporting

The DESNZ 2026 greenhouse gas conversion factors, published in June 2026, include three homeworking factors. Each is in kgCO2e per FTE working hour:

Factor 2025 set 2026 set
Office equipment 0.03144 0.02159
Heating 0.30234 0.30234
Homeworking (office equipment + heating) 0.33378 0.32393

The 2026 methodology paper explains how the factors are built, based on a 2020 EcoAct homeworking whitepaper:

Office equipment
– Equipment: a laptop or PC, monitor, phone and printer, assumed to draw 140 W, the same as an office workstation
– Lighting: 10 W per homeworker
– Converted using the UK electricity factor. This part fell in 2026 because the 2026 electricity factor dropped significantly after a change in how DESNZ calculates it.

Heating
– All home heating is assumed to be natural gas
– Heating runs six months a year (October to March) for 10 hours a day
– Only two-thirds of homeworkers add heating demand. One-third are assumed to share a home with someone who would be at home anyway.
– The heating factor has been held constant since the 2022 set.

Because the heating assumption is an annual average, you apply the combined factor to every homeworking hour in the year, not just winter hours.

How do you calculate homeworking emissions?

The formula is simple:

FTE homeworking hours × 0.32393 kgCO2e = homeworking emissions (DESNZ 2026)

Worked example

A consultancy has 25 FTE employees. Its hybrid policy is three days a week at home, 7.5 hours a day, for 46 working weeks after leave and bank holidays.

  1. FTE hours: 25 × 3 × 7.5 × 46 = 25,875 hours
  2. Emissions (2026 factor): 25,875 × 0.32393 = 8,382 kgCO2e, or 8.38 tCO2e
  3. Split:
  4. Heating: 25,875 × 0.30234 = 7,823 kgCO2e (about 93%)
  5. Office equipment: 25,875 × 0.02159 = 559 kgCO2e

Using the 2025 factor instead gives 25,875 × 0.33378 = 8,637 kgCO2e. That is 255 kg more for exactly the same working pattern. The difference comes entirely from the change to the electricity factor. Apply the factor year that matches your reporting period and note it in your method.

Two practical notes:

  • Part-time staff: convert to FTE first, or use actual contracted hours.
  • Fully remote staff: include them on the same basis. Their homeworking hours will be much higher than those of hybrid colleagues.

Where do you get the data?

You rarely need a survey to start. Useful sources:

  • HR systems: headcount, FTE and contracted hours
  • Hybrid working policy: expected days at home per week
  • Desk booking or access data: actual office attendance, to check against the policy
  • Short annual survey: home heating type and actual homeworking days, if you want to refine the estimate

Record which source you used and update it each year. If attendance changes, both your commuting and homeworking figures should move.

What are the limitations of the factor?

The DESNZ factor gives a consistent, defensible estimate. It is not a measurement. Know its limits before you present results:

  • Heating type. It assumes gas heating in every home. Employees with heat pumps or electric heating will have different emissions.
  • Renewable tariffs. Household green tariffs are not reflected. Do not adjust for them unless you collect evidence and explain your method.
  • Climate and housing. The factor is a UK average. It does not reflect the size, insulation or location of individual homes.
  • Behaviour. People who would heat their homes anyway, such as carers or those sharing a home, are covered by the two-thirds assumption, not measured.

For most organisations these limits are acceptable, provided they are disclosed. If homeworking turns out to be a material share of your footprint, an employee survey on heating type and actual hours is the next step.

How should you report and reduce homeworking emissions?

Report homeworking alongside commuting in Category 7, with the factor year, the FTE-hour basis and your data sources. Show both together when you explain a change. A drop in commuting emissions alongside a rise in homeworking emissions is a shift, not necessarily a cut.

Ways to reduce homeworking emissions include:

  • Office consolidation with a plan. If you reduce office space, track the full effect, including homeworking, rather than counting only the saving on the building.
  • Equipment choices. Laptops and efficient monitors draw less power than desktop setups.
  • Employee support. Guidance or schemes that help staff improve home energy efficiency or switch heating.
  • Smarter office days. Aligning office days within teams lets you heat fewer floors, which reduces your Scope 1 and 2 as well.

For more ideas across the business, see our list of quick wins to reduce business carbon emissions. To add homeworking to a full footprint estimate, use our business carbon footprint calculator. For more detail on the wider factor set, read https://auditmycarbon.com/uk-government-ghg-conversion-factors-2025/.

FAQ

Do I have to report homeworking emissions?

No. The GHG Protocol treats teleworking as optional within Category 7, and UK reporting rules such as SECR do not require it. Many organisations include it because hybrid working is now a material part of how they operate.

Which category do homeworking emissions go in?

Scope 3 Category 7, employee commuting. The GHG Protocol guidance specifically allows teleworking emissions to be included there.

What is the DESNZ homeworking factor for 2026?

The combined factor is 0.32393 kgCO2e per FTE working hour: 0.02159 for office equipment and 0.30234 for heating. The 2025 combined factor was 0.33378.

Should I apply the heating factor in summer?

Yes. DESNZ spreads six months of heating across the year as an annual average, so apply the combined factor to all homeworking hours. Using it only in winter would understate the total.

Can homeworking reduce my overall carbon footprint?

It can if office space and energy use fall and commuting falls by more than home energy rises. The only way to know is to measure office energy, commuting and homeworking together over time.

Sources

#carbon footprint #desnz conversion factors #employee commuting #homeworking #hybrid working #scope 3
B K Hooda
B K Hooda
Carbon Audit Specialist · Audit My Carbon
🌿
Eco-Auditor Bot
Online